+91 95492 20707 [email protected] Gurugram · Delhi NCR · Neemrana · Ahmedabad
India’s No.1 TrustedEntrance Automation System
HomeProductsIndustriesAbout UsProjectsBlogLocationsContact Us
Access Control & Security

Face Recognition System

ISO 9001 · CE certified Manufacturing in India since 2011

A contactless face recognition system that verifies identity in under a second with liveness detection to defeat photo spoofing. Hygiene-friendly entry for hospitals, clean rooms and premium offices, with mask-aware recognition and attendance logging.

Key Highlights
Verify: < 1 sec
Liveness: anti-spoof
Custom-engineered to your exact site, load and duty-cycle requirements
ISO 9001 manufactured & CE marked, trusted by multinational clients
Pan-India installation & AMC with a 4-hour emergency response SLA
Other Access Control & Security Types
Quick Specifications
Verify< 1 sec
Livenessanti-spoof
BrandYadav Entrance Automation Pvt. Ltd.
ManufacturingMade in India · ISO 9001 · CE
In-house manufacturing AMC & service plans Pan-India installation
Manufactured by Yadav

ISO 9001 · CE marked · Make-in-India · Manufacturing since 2011 · 500+ installations across 50+ cities. See the full Access Control System Supplier in India range and how we build it, or read more about our plant and capabilities.

Technical Data

Face Recognition System: Technical Specifications

Complete engineering data for the Yadav Entrance Automation access control and security range. All systems are configured to order, readers, controllers, locks and turnstile lanes are matched to your facility.

ParameterSpecification
Reader TechnologyRFID 125 kHz / smart card 13.56 MHz / fingerprint / face / palm
Controller InterfaceWiegand 26 / 34-bit & TCP-IP networked controllers (1–4 door)
User / Credential CapacityUp to 100,000 users; 1,00,000+ event logs per controller
Turnstile Throughput30–40 persons/min per lane (tripod / flap / speed barrier)
Lane WidthStandard ~550mm; wide-aisle ~900mm (wheelchair / trolley)
Lock TypeFail-safe EM lock (270/600 lb) or fail-secure electric bolt
Security LogicAnti-passback, door interlock (mantrap), time-zone & multi-factor
Video Door PhoneIP HD video, remote release, mobile-app answer, multi-tenant
Outdoor RatingIP65 weatherproof readers & turnstile housings for exteriors
Power Supply12V DC SMPS with battery backup; turnstiles 230V AC
IntegrationAttendance / payroll software, CCTV / VMS, fire-alarm release
Housing / FinishSS 304 brushed turnstile cabinets; powder-coated MS options
CertificationsISO 9001:2015, CE Marked, RoHS-compliant electronics
Warranty1 year electronics; 2 years turnstile mechanism
Talk to an Engineer Request Custom Specifications
At a glance

What the Face Recognition System is, and who it suits

The Face Recognition System is a type of access control & security used across offices, factories, campuses and parking facilities. It is built to order at our Neemrana plant, installed and commissioned by our own engineers, and supported afterwards with spares and maintenance. See the full Access Control & Security range, the sectors we serve, or every product line.

Where the Face Recognition System is typically installed
  • Factory and office main entrances
  • Warehouse and stores access points
  • Parking entries with vehicle identification
  • Campus and multi-building sites
  • Server rooms and restricted areas
  • Attendance-controlled shop floors
What to send us for an accurate quote
  • Number of doors, lanes or entry points to control
  • Approximate number of users or vehicles
  • Reader type: RFID, biometric or face recognition
  • Any integration needed with existing attendance or ERP systems
  • Power and network availability at each point
  • Indoor or outdoor mounting

Send these with your enquiry and an engineer replies with a drawing and a written delivery date, rather than a generic response. Talk to an engineer →

Reference: manufacturing certified to ISO 9001, applicable products CE marked (European Commission), built to Indian Standards published by the Bureau of Indian Standards.

Made in India · Pan-India Service

Face Recognition System: Engineered & Supported Across India

The Face Recognition System is manufactured and supported entirely within India. As an Indian manufacturer of access control & security, Yadav Entrance Automation Pvt. Ltd. engineers each unit for the realities of Indian offices, factories, campuses and parking facilities, variable power supply, high ambient temperatures, dust and monsoon humidity, and backs it with in-house manufacturing, pan-India installation and after-sales maintenance.

  • Made in IndiaManufactured in-house at our Indian facilities: qualifies as a Make-in-India product for government and PSU procurement.
  • Standard Indian MainsPowered models run on 230V single-phase or 415V three-phase at 50 Hz; manual / non-powered options where applicable.
  • Established Since 2011Part of a track record of 500+ installations across 50+ Indian cities.
  • Pan-India Install & AMCInstallation, genuine spare parts and Annual Maintenance Contracts (AMC) available nationwide.
  • GST-Compliant SupplyGST invoicing for Indian businesses, with documentation suited to enterprise and PSU procurement.
  • Built for Indian ConditionsSpecified for the heat, dust and monsoon humidity common on Indian industrial sites.
Key Service Regions

Strong on-ground presence in the NCR & Haryana industrial corridor, Gurugram, Manesar, Bhiwadi, Neemrana, Bawal, Faridabad, Noida, Jhajjar, Bahadurgarh and Delhi, and the Gujarat industrial belt, Ahmedabad, Sanand, Vithlapur and Mandal. Installation and service available across India. See all areas we serve →

Applications

Where the Face Recognition System fits

Contactless verification where speed and hygiene both matter: office entrances, clinical buildings, controlled areas and any site that wants biometric certainty without anyone touching a reader. Verification in under a second with anti-spoof liveness detection to prevent a photograph being used in place of a person.

Choosing

Face Recognition System vs the alternatives

Against fingerprint readers, nothing is touched and gloves are irrelevant, which matters in clinical, food and cold environments. Against cards, the credential cannot be lent. The considerations are real: performance depends on lighting and camera position, and face data is personal information that your organisation may have policies about, so it deserves a decision rather than a default.

Before you enquire

Specifying a Face Recognition System

Tell us where the units go and what the lighting is like, since a backlit doorway is the commonest cause of poor recognition. Confirm user numbers and how enrolment will be managed. Say whether masks are routinely worn, and check whether your organisation has a policy on biometric data before committing.

FAQs

Face Recognition System: Frequently Asked Questions

How fast is verification?
Under a second in normal conditions. Real-world speed depends heavily on lighting and on where the camera sits relative to the approach, which is why positioning is part of the design rather than an installation detail.
What is liveness detection?
Anti-spoof checking that confirms it is a live person rather than a photograph or a screen. Without it, face recognition can be defeated with a printed picture, so it is not an optional refinement.
Does lighting affect it?
Considerably. A camera facing a bright window sees a silhouette. Getting light onto the face rather than behind it is the single biggest factor in whether the system performs well.
Does it work with masks?
Performance varies, and it is worth testing against your actual conditions rather than assuming. Tell us if masks are routine and we will factor it into the recommendation.
What about privacy and data protection?
Face data is personal information. Systems typically store a mathematical template rather than photographs, but your organisation may have policies about collecting it at all. That is worth settling before installation rather than after.
Which regions do you install and service in?
We install and service across India, with a strong on-ground presence in the NCR & Haryana corridor (Gurugram, Manesar, Bhiwadi, Neemrana, Bawal, Faridabad, Noida, Jhajjar, Bahadurgarh and Delhi) and the Gujarat belt (Ahmedabad, Sanand, Vithlapur and Mandal). See our Areas We Serve page for the full list.
Do you provide installation, spares and AMC?
Yes. We handle manufacture, installation, genuine spare parts and Annual Maintenance Contracts (AMC) nationwide, a single vendor for the full lifecycle of your access control & security.
Is the Face Recognition System certified?
Our manufacturing is ISO 9001 certified and products are CE marked for clients who require it.
Get a Quote Today

Access Control Design + Quote in 24 Hours

No generic quotes, no run-around.

🛡️

OEM Supply & Integration

Every access control system supplied and integrated under ISO 9001 quality control, proven platforms, no grey-market parts.

📐

Free Site Survey & Design

Our engineers survey your doors and lanes and supply a full system design and cabling layout, at no charge.

🔧

AMC Available Nationwide

Annual Maintenance Contracts covering all access control and security equipment with a 4-hour emergency response SLA.

Request a Face Recognition System Quote

Response guaranteed within 24 business hours. Free site survey included.

By submitting, you agree to our privacy policy. We never share your data with third parties.

Chat on WhatsApp