500 kg – 5,000 kg+
Click to enlarge
Hydraulic Goods Lift & Cargo Lift
Yadav Entrance Automation is a hydraulic goods lift manufacturer in India, building cargo lifts, warehouse lifts, mezzanine floor lifts and material handling lifts from 500 kg to 5,000 kg+ capacity. Every goods lift is engineered for safe goods-only vertical transfer — between floors, mezzanines and dispatch bays — with landing-door interlocks, manual lowering on power failure and a rugged chequer-plate cabin as standard, referencing IS 14665 for goods-only operation.
| Rated Capacity | 500 / 1,000 / 2,000 / 3,000 / 5,000 kg+ |
| Travel / Levels | Up to ~12m; 2–4 levels (hydraulic 1–2 stop or traction) |
| Cabin Size | 1,200×1,000mm to 3,000×2,500mm (custom) |
| Power Unit | 3.0–7.5 kW; 415V 3-phase; manual lowering on power fail |
Hydraulic Goods Lifts Built for Indian Industry
Six engineering advantages that make Yadav Entrance Automation hydraulic goods lifts and cargo lifts the preferred choice for warehouses, factories and multi-floor commercial buildings across India.
Capacity from 500 kg to 5,000 kg+
Our goods lift range covers every load class — from 500 kg parcel lifts to 5,000 kg+ heavy-duty cargo lifts for palletised stock and machinery. Hydraulic and traction drives are matched to your duty cycle, travel and number of landings.
Fail-Safe Safety as Standard
Every goods lift ships with landing-door electrical interlocks that prevent movement unless gates are closed, an overload cut-off, slack-rope and rupture-valve protection, plus manual lowering so trapped loads can always be brought to a landing on power failure.
Precision Hydraulics, Low Maintenance
Chrome-plated cylinder rods, IP55 power packs and German-profile seals deliver smooth, drift-free travel cycle after cycle. The compact HPU mounts remotely in a machine cupboard, and all wear parts are stocked nationally for rapid replacement.
Enclosed Shaft or Open Mezzanine
Choose a fully enclosed-shaft cargo lift with landing doors for inter-floor goods movement, or an open mezzanine floor lift with safety gates and edge guarding to feed a storage platform. Both integrate with conveyors and dock equipment.
Custom Cabin Sizes
Cabin sizes from 1,200×1,000mm up to 3,000×2,500mm, with chequer-plate floors, full-height guarding and roller decks to order. We design to your load footprint, travel and shaft or pit dimensions — not a fixed catalogue size.
Pan-India Install & AMC
Our service network installs and maintains goods lifts nationwide, with Annual Maintenance Contracts carrying a 4-hour emergency response SLA. One vendor for manufacture, installation, spares and service — no middlemen.
Types of Goods & Cargo Lifts We Manufacture
Five goods lift configurations covering every material-handling and inter-floor transfer application. Each is built to order — tell us your load, travel, number of landings and duty cycle and we engineer to match.
Most Popular
Hydraulic Goods Lift
The workhorse hydraulic goods lift for vertical goods-only transfer between floors. Smooth, drift-free travel from 500 kg to 5,000 kg, powered by a compact HPU with rupture valve and manual lowering. Ideal for a 1–2 stop, 2-level building where a simple, heavy-duty lift is needed.
View details
Enclosed Shaft
Cargo Lift
A fully enclosed-shaft cargo lift with landing doors and interlocks at every level, serving 2–4 floors for inter-floor goods movement. Hydraulic or traction drive lets it travel up to ~12m, making it the secure choice for multi-storey warehouses and commercial buildings.
View details
Logistics
Warehouse Lift
A warehouse lift engineered for high-cycle palletised dispatch and storage feeding. Wide chequer-plate cabins take a full pallet or stillage, and duty-rated power packs handle continuous operation alongside dock levelers and conveyors across the loading bay.
View details
Open Type
Mezzanine Floor Lift
An open mezzanine floor lift that feeds a storage mezzanine without a full shaft — safety gates, edge guarding and an upper landing barrier replace enclosed doors. The compact, cost-effective way to move goods up to a mezzanine where head-height is limited.
View details
Material Handling
Material Handling Lift
A versatile material handling lift for moving stock, components and trolleys between work levels on the shop floor. Configured with roller or plate decks and gate interlocks, it replaces manual carrying and forklift double-handling between mezzanine and ground.
View detailsWhere Goods & Cargo Lifts Are Used
Yadav Entrance Automation goods lifts are deployed across India's warehousing, manufacturing, retail and commercial sectors — each with specific load, travel and duty-cycle requirements our engineers address at specification stage.
Inter-floor palletised stock movement, mezzanine feeding and dispatch-bay transfer in high-throughput distribution centres
Goods-only transfer of components, raw material and finished stock between production floors and stores
Cargo lifts moving merchandise between basement stock, ground floor and upper sales levels in multi-storey stores
Service goods lifts and dumbwaiter-scale cargo lifts moving food, linen and supplies between kitchen and floors
Open mezzanine floor lifts feeding storage platforms where head-height rules out a full enclosed shaft
Warehouse lifts moving palletised cold-store and FMCG stock between levels without manual handling
SS-clad, washdown-capable goods lifts for GMP areas requiring clean, contamination-free vertical transfer
Cargo lifts for offices, hospitals and institutions moving equipment, files and supplies across 2–4 floors
Full Goods Lift Specifications
Complete engineering data for the Yadav Entrance Automation hydraulic goods lift and cargo lift range. All models are built to order — capacity, travel, number of landings and cabin size are configured to your application.
| Parameter | Specification |
|---|---|
| Rated Capacity | 500 kg / 1,000 kg / 2,000 kg / 3,000 kg / 5,000 kg+ (custom on request) |
| Travel & Levels | Up to ~12m travel; 2 to 4 levels (1–2 stop hydraulic or traction) |
| Drive Type | Hydraulic (direct / indirect acting) or traction (MR/MRL) — goods-only |
| Cabin Size (Standard) | 1,200×1,000mm; custom up to 3,000×2,500mm |
| Configuration | Enclosed shaft (cargo lift) or open mezzanine floor lift type |
| Power Unit (HPU) | 3.0 kW – 7.5 kW; 415V 3-phase; IP55 enclosure; remote machine cupboard |
| Travel Speed | Approx. 0.10–0.25 m/s (load & drive dependent) |
| Cabin Floor | Anti-skid chequer plate (6–8mm); roller-top deck optional |
| Frame & Shaft | Structural steel / RHS sections — IS 2062 Grade B; fabricated shaft optional |
| Landing Doors | Manual / power gates with electrical interlocks at each landing |
| Safety Devices | Door interlocks, overload cut-off, rupture valve, slack-rope switch, manual lowering on power fail |
| Control | Collective call-send push buttons at each landing + emergency stop |
| Certifications | ISO 9001:2015, CE Marked; designed referencing IS 14665 (goods-only) |
| Warranty | 2 years hydraulic / drive system, 5 years structural frame |
Goods Lift Variant Comparison
| Lift Type | Capacity | Hydraulic Goods Lift ⭐ Most Popular | Levels / Travel | Best Use |
|---|---|---|---|---|
| Mezzanine Floor Lift | 500–1,000 kg | Open / 2-level | 2 levels / mezz height | Mezzanine feeding |
| Hydraulic Goods Lift | 1,000–2,000 kg | Enclosed / 1–2 stop | 2 levels / up to 6m | Inter-floor goods |
| Material Handling Lift | 500–3,000 kg | Roller / plate deck | 2 levels / shop floor | Stock, trolleys |
| Warehouse Lift | 2,000–5,000 kg | Pallet-width cabin | 2–3 levels / up to 9m | Palletised dispatch |
| Cargo Lift (Multi-Stop) | 2,000–5,000 kg+ | Hydraulic / traction | 3–4 levels / up to ~12m | Multi-storey buildings |
Certified to International Standards
Our goods lift range carries the certifications required by India's largest 3PL operators, multinational manufacturers and government procurement bodies.
9001
Quality management certification covering design, manufacture, installation and after-sales service of all goods and cargo lifts.
European conformity per EU Machinery Directive 2006/42/EC — required by multinational clients and confirming safety compliance.
14665
Goods lifts designed referencing Indian Standard IS 14665 for goods-only (non-passenger) operation, doors and safety devices.
2062
Structural steel to Indian Standard IS 2062 Grade B for shaft, cabin and base frames — certified load and fatigue performance.
in India
100% manufactured at our registered Indian facilities — qualifies for government procurement preference and PSU tenders.
Goods Lift Design + Quote in 24 Hours
No generic quotes, no run-around.
In-House Manufacturing
Every goods lift manufactured under ISO 9001 quality control — no imported products, no middlemen.
Free Site Survey & Civil Drawing
Our engineers survey your shaft or pit and supply a full civil drawing for your contractor — at no charge.
AMC Available Nationwide
Annual Maintenance Contracts covering all goods lifts and material-handling equipment with a 4-hour emergency response SLA.
Choosing goods & cargo lifts: what actually decides the specification
A goods lift is a lift built to move materials rather than passengers between levels. The right one is decided by the opening and how it is used, not by the catalogue. These are the things worth settling before anyone quotes.
What to measure
- Clear opening width and height — the daylight opening the vehicle or person passes through, not the hole in the wall.
- Headroom above the opening — decides which products are possible at all.
- Side-room, both sides — guides, tracks and motors live here, and it is rarely equal on both sides.
- Power at the position — 230V single-phase or 415V three-phase, 50 Hz.
- Cycles per shift — the most under-specified figure on a typical enquiry.
- Environment — temperature, dust, washdown, coastal air or a hygiene requirement.
The full goods cargo lifts range
- Hydraulic Goods Lift — The workhorse hydraulic goods lift for vertical goods-only transfer between floors.
- Cargo Lift — A fully enclosed-shaft cargo lift with landing doors and interlocks at every level, serving 2–4 floors for inter-floor goods movement.
- Warehouse Lift — A warehouse lift engineered for high-cycle palletised dispatch and storage feeding.
- Mezzanine Floor Lift — An open mezzanine floor lift that feeds a storage mezzanine without a full shaft — safety gates, edge guarding and an upper landing barrier replace enclosed doors.
- Material Handling Lift — A versatile material handling lift for moving stock, components and trolleys between work levels on the shop floor.
Where goods & cargo lifts are typically installed
We build goods & cargo lifts for warehouses, mezzanine floors and multi-level production areas.
Sectors we supply
- Warehousing and logistics — distribution centres, 3PL facilities and dispatch docks.
- Cold chain — cold stores, freezer rooms and temperature-controlled dispatch.
- Automotive and engineering — component plants, press shops and assembly lines.
- Pharmaceutical and clean manufacturing — controlled and hygiene-critical areas.
- Infrastructure and construction — plant perimeters, site structures and civil scopes.
- Commercial and institutional — offices, campuses, hospitals and parking facilities.
What drives the cost
We quote per project rather than publishing prices. The figure moves with the rated capacity, the number of levels served, the travel height and the shaft detail. Send the measurements above and an engineer returns a drawing and a written quotation. Talk to an engineer →
Standards, materials and what we certify
- ISO 9001 — our quality management system is certified to it.
- CE marking on applicable products — a manufacturer's declaration of conformity, not a quality grade.
- IS 2062 structural steel for fabrication, gates and structures.
- IS 6248 for metal rolling shutters.
- EN 1634 as the reference for fire-resistance testing.
- Make in India and GST registered — relevant to government and PSU procurement.
- 230V single-phase / 415V three-phase, 50 Hz — standard Indian industrial mains.
Reference sources: European Commission, CE marking · Bureau of Indian Standards
From enquiry to handover
- Enquiry. Opening sizes, site location and application. An engineer picks it up.
- Site survey. We measure the clear opening, headroom, side-room and power position.
- Drawing and quotation. Equipment, safety schedule, electrical requirement and a written delivery date.
- Manufacture at Neemrana. Built to the approved drawing and the measured opening.
- Installation and commissioning. Fitted and tested by our own team through full travel with safety devices live.
- Handover, spares and AMC. Operating instructions on site, then service through the nearest team.
Explore the full product range, the sectors we serve, our delivered installations, or the areas we cover.
Goods & Cargo Lifts — frequently asked questions
Who manufactures goods & cargo lifts in India?
Yadav Entrance Automation Pvt. Ltd. manufactures goods & cargo lifts in India, at our plant at Neemrana, Rajasthan on the Delhi-Jaipur NH-48 corridor. We have been building entrance automation equipment since 2011, with more than 500 installations across over 50 cities. Equipment is made to the measured opening rather than to a catalogue size, then installed and commissioned by our own engineers.
What is a goods lift?
A goods lift is a lift built to move materials rather than passengers between levels. It is specified against the opening it serves and the way that opening is used, so two openings of the same width can need different equipment. We build goods & cargo lifts for warehouses, mezzanine floors and multi-level production areas.
What does a goods lift cost?
We quote per project rather than publishing a price, because the figure moves with the rated capacity, the number of levels served, the travel height and the shaft detail. Send the opening dimensions, the site location and how the opening is used, and an engineer will come back with a drawing and a written quotation. That is faster than a list price that would need revising once the site is measured.
Do you supply goods & cargo lifts near me?
We install and service across North and West India, with the plant at Neemrana and teams in Delhi NCR and Gujarat. Installations to date cover more than 50 cities, concentrated in the Delhi-Jaipur corridor, Haryana, Rajasthan and Gujarat. Tell us the site location with your enquiry and we will confirm coverage before quoting.
Can goods & cargo lifts be motorised or automated?
Yes, where the product supports it. Motorised operation is specified against the weight being moved and the number of cycles per day, not simply added on. The drive, the control panel and the safety devices are listed on the technical drawing you approve before manufacture, so nothing about the automation is a surprise on site.
What power supply is needed?
Standard Indian industrial mains: 230V single-phase or 415V three-phase at 50 Hz. Which one applies depends on the product, the size of the opening and the duty cycle. The requirement is confirmed on the approved drawing so your electrical contractor can position the supply and isolator before delivery.
What measurements do you need to quote for goods & cargo lifts?
Clear opening width and height first — the daylight opening, not the wall opening. Then the headroom above the opening and the free side-room each side. Add the power available at the position, how many openings, and roughly how often each is used in a shift. Those figures let an engineer rule out the wrong products before visiting.
Do you handle installation, or only supply?
We manufacture, install and commission with our own team, and we do not sub-contract installation of our own equipment. How well a unit is fitted to its opening decides how long it lasts, so it is not work we hand off. Handover includes operating instructions on site.
Do you provide service, spares and AMC?
Yes. We supply genuine spares and offer Annual Maintenance Contracts for the equipment we manufacture. On high-cycle equipment maintenance matters more than most buyers expect, because wear tracks cycles rather than calendar age. Tell us the site and the equipment and we will route it to the nearest service team.
Which standards and certifications apply?
Our manufacturing is certified to ISO 9001 and applicable products are CE marked. Structural steelwork commonly references IS 2062 and rolling shutters IS 6248, both published by the Bureau of Indian Standards; fire-resistance testing is commonly referenced to EN 1634. If your specification names a standard, send the clause with the enquiry so it is written into the drawing.
Can you make goods & cargo lifts to a non-standard size?
Yes, and most industrial openings are non-standard. Equipment is built to the measured opening rather than to a catalogue size. We take the clear width, clear height, headroom and side-room on site, then confirm the achievable size on the drawing before manufacture begins.
How long does manufacture and delivery take?
It depends on the product and whether the opening is standard or bespoke, and it moves with material availability and the current order book. Rather than quote a general figure that may not hold, we confirm a delivery date in writing with the quotation.
Do you work with contractors, consultants and PSUs?
Yes. We supply end users directly and also work as a vendor to main contractors, PMCs and design consultants. We are GST registered and manufacture under Make in India, which matters for government and PSU procurement. For tendered work we can provide drawings, product data and the compliance documentation the specification calls for.
What safety devices are included?
For powered equipment, typically safety photocells across the opening, a safety edge where applicable, limit switches at both travel ends, and a manual release for use during a power cut. Vehicle equipment can add loop detectors. The exact schedule is listed on the drawing you approve, so check that rather than assuming a standard set.
How do I get a quote for goods & cargo lifts?
Use the enquiry form on this page and the details reach our team directly, or call and send a WhatsApp message on +91 95492 20707, or email [email protected]. If you already hold drawings or a specification, say so and an engineer will respond rather than a generic reply.