Manufacturing
Units in Okhla, Naraina, Mayapuri and Wazirpur.

Delhi · served from Gurugram & Neemrana
Motorised rolling shutters for Delhi's industrial areas, godowns and showrooms, from Okhla to Narela. Built at our Neemrana works and installed by our NCR team from the Gurugram office.
Delhi's industrial areas run on openings that go up and down all day: godowns in Narela and Bawana, units in Okhla and Mayapuri, showroom fronts in Kirti Nagar. An automatic rolling shutter takes that work off the staff and closes the opening fully every time. We have no premises in Delhi. Shutters are built at Neemrana and installed by the NCR team based at our Gurugram office.
The range, numbered

Tubular or side-mounted motor with manual release, for openings used several times a shift.
View motorised rolling shutter
Heavy-gauge curtain and chain-drive motor for wide factory and warehouse openings.
View industrial rolling shutter
Lighter curtain for shopfronts and showrooms, so a smaller motor does the work.
View aluminium rolling shutter
Punched slats that keep airflow and visibility while the opening is closed.
View perforated rolling shutter
Tested assembly that descends automatically on a fire signal.
View fire-rated rolling shutter
Motors and control panels to automate an existing manual shutter.
View shutter motors and panelsSpecify the right one
Three closures, three jobs. Pick by how often the opening is used and what it must hold back.
| Automatic shutter | Manual shutter | High-speed door | |
|---|---|---|---|
| Operated by | Button, switch or remote | Hand or gear | Sensor, button or remote |
| Built for | A secure closure used daily | A secure closure used rarely | Speed on a busy internal opening |
| Cycle rate | Moderate | Low | Very high |
| Power cut | Manual release | Not affected | Manual release |
| Best placed | Factory gates, godowns, shopfronts | Stores, low-use openings | Internal traffic, cold and clean rooms |
Why the shortlist ends here
A plant purchase manager checks four things: do they supply plants like mine, are they close enough to service me, can they build what I need, and will someone answer the phone. Here is how Yadav answers all four.
Get a quoteAsk how the motor was sized. Curtain weight and cycles per day decide it, not the opening width alone.
Power cuts happen. Check the release works by hand before the installer leaves.
Photocells, a bottom safety edge and limit switches should be listed on the approved drawing.
Galvanised steel for exposed godown fronts, aluminium where weight and appearance matter.
A shutter needs an AMC. We service Delhi from the Gurugram office with our own team.
Where these go to work
Units in Okhla, Naraina, Mayapuri and Wazirpur.
Godowns and sheds in Narela, Bawana and Mundka.
Wholesale and dispatch openings used all day.
Stores and service entries needing a secure closure.
Insulated shutters where an opening separates temperature zones.
Peer proof, not promises
Japanese and European plants audit a supplier before they place an order. These are plants in your corridor that cleared us and buy their entrance automation from Neemrana.
Recent handovers
Ghiloth
30 motorised rolling shutters, supply to handover in 20 days
Bawal
Automatic mesh-type rolling shutters
Neemrana
Powder-coated shutters with rubber bottom seal
Bawal
Four-panel motorised sliding door
Answers for buyers and specifiers
The real questions people search on Google and ask an AI assistant, answered straight. No pricing games, no jargon.
Yes. Automatic, motorised, motorized and electric rolling shutter all describe the same product: a rolling shutter with a motor drive. Buyers in Delhi NCR search for all four names, so we use them interchangeably.
Every motor we fit has a manual release, so the shutter can be opened by hand chain or crank when the power is off. Where the opening must work through an outage, battery backup or a UPS can be specified and is listed on the drawing.
Often yes. If the curtain, barrel and guide rails are sound, square and suit the motor, a motor and control panel can be added without replacing the shutter. Whether that holds for your opening is a site-survey question, and we will tell you if replacement is the better buy.
Galvanised steel is the security and industrial choice and holds up well outdoors. Aluminium is lighter, which suits shopfronts and lets a smaller motor do the work. Curtain weight drives motor size, so the material is chosen before the motor.
We quote per project, because the figure moves with the opening size, slat material and finish, the motor type and the daily cycles. Send the opening dimensions and the site address for a drawing and a written quotation.
Keep the guide rails clear of debris, check the bottom seal and safety edge, test the photocells and manual release, and have the barrel, springs and motor brake checked on a schedule set by the cycle count. An AMC covers this so faults are caught early.
Yadav Entrance Automation Pvt. Ltd. manufactures automatic rolling shutters at its works at Neemrana, Rajasthan and installs them across Delhi with its own engineers. We have been building entrance automation equipment since 2011, with 500+ installations across 50+ cities.
No. We hold no premises inside Delhi, and we would rather say so. Delhi is served from our Sales & Corporate Office at Sector 83, Gurugram, with manufacturing at Neemrana, Rajasthan. Survey, installation and service in Delhi are done by the same NCR team that covers Gurugram.
All of Delhi, including Okhla, Naraina, Mayapuri, Wazirpur, Narela, Bawana, Mundka and Patparganj. Tell us the site address with your enquiry and we will confirm the survey date before quoting rather than after.
Godowns and sheds in Narela, Bawana and Mundka, manufacturing units in Okhla, Naraina, Mayapuri and Wazirpur, and showroom and shopfront openings where remote control and a lighter aluminium curtain suit daily use.
Use the form on this page, call or WhatsApp us. Send the opening or dock size, what the opening is used for, how many there are and the site address. An engineer reviews it and returns a drawing and a written, project-specific quotation.
Yes. We are GST registered and manufacture under Make in India, and we supply end users, main contractors, PMCs and consultants. Tell us what your purchase or tender process needs and we will provide the documentation with the quotation.
Yes. Multi-site orders across Delhi NCR are common, and one team surveys, builds and installs all of them, so drawings, spares and service stay consistent across sites.
A galvanised steel industrial curtain with a side-mounted or chain-drive motor and a manual release. If the godown needs airflow while closed, perforated slats in part of the curtain do that without giving up security.
Yes. It needs a supply and an isolator close to the opening, single-phase or three-phase as the drawing states. Your electrician can run it before we arrive, which keeps installation to a single visit.
Yes. An aluminium or perforated curtain on a tubular motor is the usual shopfront build, with remote control and a manual release. The headroom above the opening decides whether the barrel sits inside or outside, which we check on survey.
Yadav Entrance Automation is a rolling shutter manufacturer serving Delhi, building automatic, motorised and electric rolling shutters with remote and push-button control, plus rolling shutter motors to automate existing shutters. Built at Neemrana, installed across Delhi, Okhla, Naraina, Narela and Bawana by our NCR team from Gurugram. Send your opening size for a quote.
Send the opening or dock size, the application and a rough timeline. Our team will review the requirements and contact you about a project-specific quote.
A automatic rolling shutter is a rolling shutter driven by an electric motor. We manufacture automatic rolling shutters at Neemrana on the Delhi-Jaipur NH-48 corridor and install them across Delhi with our own engineers — the same team that surveys the opening also commissions the equipment.
For a side-by-side comparison before you enquire, read our buyer's guide: High-speed door or rolling shutter? How to choose for your opening.
Reference: applicable products are CE marked (European Commission); Indian Standards are published by the Bureau of Indian Standards.
Yadav Entrance Automation Pvt. Ltd. manufactures automatic rolling shutters at our plant at Neemrana, Rajasthan on the Delhi-Jaipur NH-48 corridor, within easy reach of Gurugram (Gurgaon), and installs across Delhi NCR with our own engineers. We have been building entrance automation equipment since 2011.
Yes. Our NCR and Haryana coverage includes Gurugram (Gurgaon), Manesar, Bhiwadi, Neemrana, Bawal, Faridabad, Noida, Jhajjar, Bahadurgarh and Delhi. A sales and service team is based in Delhi NCR, and the plant sits on the corridor, so survey and installation scheduling is quicker here than for most of our coverage area.
Sites in Gurugram, Manesar, Bhiwadi, Bawal and along the Delhi-Jaipur corridor are quickest, because both the plant and a service team are close. Ask when you enquire and we will give you an actual date rather than a general lead time.
Yes. We supply genuine spares and offer Annual Maintenance Contracts for equipment we manufacture, with a service team covering the NCR and Haryana corridor. On high-cycle equipment, maintenance should follow the cycle count rather than the calendar.
Yes. The plant is at Neemrana on the Delhi-Jaipur NH-48 corridor, a straightforward drive from Gurugram. Call +91 95492 20707 ahead so a visit can be scheduled and someone is free to show you the shop floor.