Auto components
Machine shops and stores across NIT and Sectors 24 and 25.

Faridabad · served from Gurugram & Neemrana
Motorised rolling shutters for Faridabad's engineering and auto-component units, from NIT to Ballabgarh. Built at our Neemrana works and installed by our NCR team from the Gurugram office.
Faridabad's machine shops and component plants tend to have wide, heavy shutters on stores and material entries, which is exactly where a manual crank gets left half-open. An automatic rolling shutter with a chain-drive or side-mounted motor sized to that curtain removes the effort and closes the opening fully. We have no premises in Faridabad; the NCR team at our Gurugram office surveys, installs and services here.
The range, numbered

Tubular or side-mounted motor with manual release, for openings used several times a shift.
View motorised rolling shutter
Heavy-gauge curtain and chain-drive motor for wide factory and warehouse openings.
View industrial rolling shutter
Lighter curtain for shopfronts and showrooms, so a smaller motor does the work.
View aluminium rolling shutter
Punched slats that keep airflow and visibility while the opening is closed.
View perforated rolling shutter
Tested assembly that descends automatically on a fire signal.
View fire-rated rolling shutter
Motors and control panels to automate an existing manual shutter.
View shutter motors and panelsSpecify the right one
Three closures, three jobs. Pick by how often the opening is used and what it must hold back.
| Automatic shutter | Manual shutter | High-speed door | |
|---|---|---|---|
| Operated by | Button, switch or remote | Hand or gear | Sensor, button or remote |
| Built for | A secure closure used daily | A secure closure used rarely | Speed on a busy internal opening |
| Cycle rate | Moderate | Low | Very high |
| Power cut | Manual release | Not affected | Manual release |
| Best placed | Factory gates, godowns, shopfronts | Stores, low-use openings | Internal traffic, cold and clean rooms |
Why the shortlist ends here
A plant purchase manager checks four things: do they supply plants like mine, are they close enough to service me, can they build what I need, and will someone answer the phone. Here is how Yadav answers all four.
Get a quoteSide-mounted and chain-drive motors for the wide, heavy shutters common on Faridabad stores and material entries.
Many Faridabad shutters are sound but manual. We motorise them where the curtain and barrel allow.
Photocells, safety edge, limit switches and manual release, listed on the drawing you approve.
Built at Neemrana, installed and serviced by our own NCR team. No sub-contracted fitting.
500+ installations across 50+ cities, under an ISO 9001 quality system.
Where these go to work
Machine shops and stores across NIT and Sectors 24 and 25.
Fabrication and assembly units on the Mathura Road belt.
Sheds towards Ballabgarh and the NH-19 corridor.
Dispatch openings used through the shift.
Stores and service entries needing a secure closure.
Peer proof, not promises
Japanese and European plants audit a supplier before they place an order. These are plants in your corridor that cleared us and buy their entrance automation from Neemrana.
Recent handovers
Ghiloth
30 motorised rolling shutters, supply to handover in 20 days
Bawal
Automatic mesh-type rolling shutters
Neemrana
Powder-coated shutters with rubber bottom seal
Bawal
Four-panel motorised sliding door
Answers for buyers and specifiers
The real questions people search on Google and ask an AI assistant, answered straight. No pricing games, no jargon.
Standard Indian mains: 230V single-phase or 415V three-phase at 50 Hz. Which one depends on the curtain weight, the opening size and the duty cycle, and it is confirmed on the drawing so your electrician can place the supply and isolator before delivery.
It depends on whether the motor was sized to the curtain weight and how many cycles it runs each day, more than on age. An undersized motor on a heavy curtain wears out early. Regular servicing of the barrel, springs and guides takes load off the motor.
Yes. A fire-rated shutter is a tested assembly that descends automatically on a fire signal, used where a wide opening sits on a fire compartment line. If your specification names a rating, send the clause so it is written into the drawing.
Yes, and most industrial openings are non-standard. Every shutter is built to the measured opening, clear width, clear height, headroom and side-room, and the achievable size is confirmed on the drawing before anything is cut.
Yes. Shutters are built at our Neemrana works and installed and commissioned by our own team, under an ISO 9001 quality system with CE-marked product where applicable. IS 6248 from the Bureau of Indian Standards is the standard commonly referenced for metal rolling shutters.
Yadav Entrance Automation Pvt. Ltd. manufactures automatic rolling shutters at its works at Neemrana, Rajasthan and installs them across Faridabad with its own engineers. We have been building entrance automation equipment since 2011, with 500+ installations across 50+ cities.
No. We hold no premises inside Faridabad, and we would rather say so. Faridabad is served from our Sales & Corporate Office at Sector 83, Gurugram, with manufacturing at Neemrana, Rajasthan. Survey, installation and service in Faridabad are done by the same NCR team that covers Gurugram.
All of Faridabad, including NIT Faridabad, Sectors 24, 25, 58 and 59, Ballabgarh and the Mathura Road belt. Tell us the site address with your enquiry and we will confirm the survey date before quoting rather than after.
Stores and material entries in auto-component and engineering units across NIT Faridabad and Sectors 24, 25, 58 and 59, and warehouse openings towards Ballabgarh, where a heavy curtain needs a motor sized to it.
Use the form on this page, call or WhatsApp us. Send the opening or dock size, what the opening is used for, how many there are and the site address. An engineer reviews it and returns a drawing and a written, project-specific quotation.
Yes. We are GST registered and manufacture under Make in India, and we supply end users, main contractors, PMCs and consultants. Tell us what your purchase or tender process needs and we will provide the documentation with the quotation.
Yes. Multi-site orders across Delhi NCR are common, and one team surveys, builds and installs all of them, so drawings, spares and service stay consistent across sites.
Usually, with a side-mounted or chain-drive motor sized to the curtain. We first check that the barrel, springs and brackets are sound, because a motor on a worn barrel fails early. If they are not, we say so before quoting.
Use the manual release to open or close it, then check whether a photocell or safety edge was triggered or the guides are fouled. If it repeats, a limit switch or the motor brake needs attention, and our service team handles it.
Often yes, after a survey. We check the curtain, barrel and guides first and tell you plainly if the shutter is worth motorising or better replaced.
Start from the curtain weight and how many times it opens per shift. That sets the motor type, and a high-use opening also gets safety photocells, a bottom safety edge and push-button control where the operator stands.
Yadav Entrance Automation manufactures automatic rolling shutters for Faridabad, including motorised, motorized and electric shutters, heavy industrial shutters with chain-drive motors, and rolling shutter motors to automate existing shutters. Built at Neemrana, installed across NIT Faridabad, Ballabgarh and the Mathura Road belt by our NCR team.
Send the opening or dock size, the application and a rough timeline. Our team will review the requirements and contact you about a project-specific quote.
A automatic rolling shutter is a rolling shutter driven by an electric motor. We manufacture automatic rolling shutters at Neemrana on the Delhi-Jaipur NH-48 corridor and install them across Faridabad with our own engineers — the same team that surveys the opening also commissions the equipment.
For a side-by-side comparison before you enquire, read our buyer's guide: High-speed door or rolling shutter? How to choose for your opening.
Reference: applicable products are CE marked (European Commission); Indian Standards are published by the Bureau of Indian Standards.
Yadav Entrance Automation Pvt. Ltd. manufactures automatic rolling shutters at our plant at Neemrana, Rajasthan on the Delhi-Jaipur NH-48 corridor, within easy reach of Gurugram (Gurgaon), and installs across Delhi NCR with our own engineers. We have been building entrance automation equipment since 2011.
Yes. Our NCR and Haryana coverage includes Gurugram (Gurgaon), Manesar, Bhiwadi, Neemrana, Bawal, Faridabad, Noida, Jhajjar, Bahadurgarh and Delhi. A sales and service team is based in Delhi NCR, and the plant sits on the corridor, so survey and installation scheduling is quicker here than for most of our coverage area.
Sites in Gurugram, Manesar, Bhiwadi, Bawal and along the Delhi-Jaipur corridor are quickest, because both the plant and a service team are close. Ask when you enquire and we will give you an actual date rather than a general lead time.
Yes. We supply genuine spares and offer Annual Maintenance Contracts for equipment we manufacture, with a service team covering the NCR and Haryana corridor. On high-cycle equipment, maintenance should follow the cycle count rather than the calendar.
Yes. The plant is at Neemrana on the Delhi-Jaipur NH-48 corridor, a straightforward drive from Gurugram. Call +91 95492 20707 ahead so a visit can be scheduled and someone is free to show you the shop floor.