Warehousing & 3PL
High-throughput docks on distribution and fulfilment floors.

Delhi · served from Gurugram & Neemrana
Hydraulic and mechanical dock levellers, shelters and seals for Delhi's warehouses and cold stores, from Narela and Bawana to Okhla. Built at Neemrana, installed by our NCR team from the Gurugram office.
Delhi docks receive everything from small tempos to full-size trailers, often at the same bay, so the height gap changes truck to truck. A dock leveller absorbs that gap so a forklift drives straight on and off. We build each leveller to the dock and the vehicles it serves. We have no premises in Delhi: levellers are built at Neemrana and installed by our NCR team from Gurugram.
The range, numbered

Push-button hydraulic platform and lip for high-frequency docks and heavier loads.
View hydraulic dock leveller
Spring-operated platform for lower-frequency docks where a simple, rugged unit fits.
View mechanical dock leveller
Bolt-on unit for a modest height difference where a pit is not practical.
View edge-of-dock leveller
Retractable or inflatable shelter that closes the gap around a backed-in trailer.
View dock shelter
Foam seal that presses to the trailer to keep the bay weather-tight and the cold in.
View dock seal
Bumpers, wheel guides, dock lights and controls that complete the bay.
View loading-bay equipmentSpecify the right one
Which leveller fits depends on how often you load, how heavy, and whether the dock has a pit. Here is the short version.
| Hydraulic | Mechanical (spring) | Edge-of-dock | |
|---|---|---|---|
| Operation | Push-button | Pull-chain, walk-down | Spring, at the dock face |
| Best for | High-frequency docks, heavier loads | Lower-frequency docks | Modest height difference, no pit |
| Operator effort | Low | Moderate | Low to moderate |
| Mounting | Pit-mounted | Pit-mounted | Bolt-on to the dock face |
| Maintenance | Hydraulic service | Spring service | Minimal |
Why the shortlist ends here
A plant purchase manager checks four things: do they supply plants like mine, are they close enough to service me, can they build what I need, and will someone answer the phone. Here is how Yadav answers all four.
Get a quoteLip reach and platform length set to the shortest and tallest vehicles you actually receive.
Leveller, shelter, seal and dock door built and installed together, so they fit.
No Delhi office. The NCR team at Sector 83, Gurugram surveys and services Delhi docks.
ISO 9001 quality system, structural steel to IS 2062.
Pit and edge-of-dock options for existing Delhi docks without rebuilding the bay.
Where these go to work
High-throughput docks on distribution and fulfilment floors.
Refrigerated docks that must stay sealed while loading.
Hygienic loading bays between the plant and the trailer.
Inbound and outbound docks across the NCR auto belt.
Dispatch docks handling raw material and finished goods.
Peer proof, not promises
Japanese and European plants audit a supplier before they place an order. These are plants in your corridor that cleared us and buy their entrance automation from Neemrana.
Recent handovers
Ghiloth
30 motorised rolling shutters, supply to handover in 20 days
Bawal
Automatic mesh-type rolling shutters
Neemrana
Powder-coated shutters with rubber bottom seal
Bawal
Four-panel motorised sliding door
Answers for buyers and specifiers
The real questions people search on Google and ask an AI assistant, answered straight. No pricing games, no jargon.
A hydraulic dock leveller raises the platform and extends the lip with a hydraulic power pack on a push button. It suits high-frequency docks and heavier loads and needs less manual effort than a mechanical unit.
Hydraulic suits high-frequency docks and heavier loads with push-button operation. Mechanical is a simpler, rugged unit for lower-frequency docks. We recommend the fit after a quick survey of your dock and traffic.
A pit leveller sits in a recess built into the dock and handles a larger height range. An edge-of-dock leveller bolts to the dock face for a modest height difference where a pit is not practical.
Yes. Pit-mounted and edge-of-dock options cover most existing docks. We confirm the right approach from the pit and floor level on survey.
A trader resells someone else's leveller and usually sub-contracts the fitting. Buying from the manufacturer means the company that sized and built the leveller also installs and services it, so one party answers for how it performs. We build at Neemrana and install in Delhi with our own team.
Start from the heaviest loaded forklift or pallet truck that will cross it, with the load on board, and how often it crosses. Capacity, platform size and lip reach are then set to order and confirmed on the drawing rather than picked from a list.
Yes, within a range. The lip length and platform travel are set to the lowest and highest vehicle beds you receive. If some vehicles sit far below the dock, a dock lift or a ramp may suit them better, and we will say so.
Dock bumpers are rubber blocks fixed to the dock face. They take the impact of a reversing truck so it does not hit the wall or the leveller. A loading bay should have them, and we supply them with the leveller.
Yes, as part of a sealed bay: an insulated dock door, a shelter or seal round the trailer and a leveller fitted so cold air does not escape round its edges.
Yadav Entrance Automation Pvt. Ltd. manufactures dock levellers at its works at Neemrana, Rajasthan and installs them across Delhi with its own engineers. We have been building entrance automation equipment since 2011, with 500+ installations across 50+ cities.
No. We hold no premises inside Delhi, and we would rather say so. Delhi is served from our Sales & Corporate Office at Sector 83, Gurugram, with manufacturing at Neemrana, Rajasthan. Survey, installation and service in Delhi are done by the same NCR team that covers Gurugram.
All of Delhi, including Okhla, Naraina, Mayapuri, Wazirpur, Narela, Bawana, Mundka and Patparganj. Tell us the site address with your enquiry and we will confirm the survey date before quoting rather than after.
Warehouses and cold stores in Narela, Bawana, Mundka and Alipur, wholesale dispatch docks, and factory loading bays in Okhla and Naraina where trucks of different heights use the same dock.
Yes. We supply genuine spares and offer Annual Maintenance Contracts for equipment we manufacture, handled by the NCR service team that covers Delhi. On high-cycle openings the service interval should follow the cycle count, not the calendar.
Yes. The works are at Neemrana on the Delhi-Jaipur NH-48 corridor. Buyers from Delhi usually combine a plant visit with a meeting at the Gurugram office. Call +91 95492 20707 ahead so someone is free to show you the shop floor.
Yes. We are GST registered and manufacture under Make in India, and we supply end users, main contractors, PMCs and consultants. Tell us what your purchase or tender process needs and we will provide the documentation with the quotation.
Yadav Entrance Automation is a dock leveller manufacturer serving Delhi, building hydraulic and mechanical dock levellers (also spelt dock levelers), edge-of-dock units, dock shelters and dock seals. Built at Neemrana and installed across Delhi, Narela, Bawana, Mundka and Okhla by our NCR team from Gurugram. Send your dock dimensions for a quote.
Send the opening or dock size, the application and a rough timeline. Our team will review the requirements and contact you about a project-specific quote.
A dock leveller is a powered platform that bridges the gap between a dock and a vehicle bed. We manufacture dock levellers at Neemrana on the Delhi-Jaipur NH-48 corridor and install them across Delhi with our own engineers — the same team that surveys the opening also commissions the equipment.
For a side-by-side comparison before you enquire, read our buyer's guide: How to choose a dock leveller: hydraulic vs mechanical vs edge-of-dock.
Reference: applicable products are CE marked (European Commission); Indian Standards are published by the Bureau of Indian Standards.
Yadav Entrance Automation Pvt. Ltd. manufactures dock levellers at our plant at Neemrana, Rajasthan on the Delhi-Jaipur NH-48 corridor, within easy reach of Gurugram (Gurgaon), and installs across Delhi NCR with our own engineers. We have been building entrance automation equipment since 2011.
Yes. Our NCR and Haryana coverage includes Gurugram (Gurgaon), Manesar, Bhiwadi, Neemrana, Bawal, Faridabad, Noida, Jhajjar, Bahadurgarh and Delhi. A sales and service team is based in Delhi NCR, and the plant sits on the corridor, so survey and installation scheduling is quicker here than for most of our coverage area.
Sites in Gurugram, Manesar, Bhiwadi, Bawal and along the Delhi-Jaipur corridor are quickest, because both the plant and a service team are close. Ask when you enquire and we will give you an actual date rather than a general lead time.
Yes. We supply genuine spares and offer Annual Maintenance Contracts for equipment we manufacture, with a service team covering the NCR and Haryana corridor. On high-cycle equipment, maintenance should follow the cycle count rather than the calendar.
Yes. The plant is at Neemrana on the Delhi-Jaipur NH-48 corridor, a straightforward drive from Gurugram. Call +91 95492 20707 ahead so a visit can be scheduled and someone is free to show you the shop floor.