Auto components
Dispatch bays for heavy, palletised parts.

Faridabad · served from Gurugram & Neemrana
Hydraulic and mechanical dock levellers, shelters and seals for Faridabad's factories and warehouses, from NIT to Ballabgarh. Built at Neemrana, installed by our NCR team from the Gurugram office.
Faridabad plants ship heavy components and receive full trailers, so a loading bay has to carry real weight at every truck height. A dock leveller built to that load gives the forklift a level, safe crossing. We have no premises in Faridabad: levellers are built at Neemrana and installed and serviced by the NCR team at our Gurugram office.
The range, numbered

Push-button hydraulic platform and lip for high-frequency docks and heavier loads.
View hydraulic dock leveller
Spring-operated platform for lower-frequency docks where a simple, rugged unit fits.
View mechanical dock leveller
Bolt-on unit for a modest height difference where a pit is not practical.
View edge-of-dock leveller
Retractable or inflatable shelter that closes the gap around a backed-in trailer.
View dock shelter
Foam seal that presses to the trailer to keep the bay weather-tight and the cold in.
View dock seal
Bumpers, wheel guides, dock lights and controls that complete the bay.
View loading-bay equipmentSpecify the right one
Which leveller fits depends on how often you load, how heavy, and whether the dock has a pit. Here is the short version.
| Hydraulic | Mechanical (spring) | Edge-of-dock | |
|---|---|---|---|
| Operation | Push-button | Pull-chain, walk-down | Spring, at the dock face |
| Best for | High-frequency docks, heavier loads | Lower-frequency docks | Modest height difference, no pit |
| Operator effort | Low | Moderate | Low to moderate |
| Mounting | Pit-mounted | Pit-mounted | Bolt-on to the dock face |
| Maintenance | Hydraulic service | Spring service | Minimal |
Why the shortlist ends here
A plant purchase manager checks four things: do they supply plants like mine, are they close enough to service me, can they build what I need, and will someone answer the phone. Here is how Yadav answers all four.
Get a quoteCapacity, platform and lip set to your heaviest loaded forklift, not a catalogue rating.
Push-button hydraulic for busy bays, spring mechanical where simplicity wins.
Leveller, shelter, seal and dock door from one maker, installed together.
ISO 9001 quality system, structural steel to IS 2062.
AMC, hydraulic service and spares from our NCR team at the Gurugram office.
Where these go to work
Dispatch bays for heavy, palletised parts.
Inbound steel and outbound assemblies on the Mathura Road belt.
Multi-bay sheds towards Ballabgarh and NH-19.
Sealed bays with shelters that hold temperature while loading.
Hygienic loading for dispatch docks.
Peer proof, not promises
Japanese and European plants audit a supplier before they place an order. These are plants in your corridor that cleared us and buy their entrance automation from Neemrana.
Recent handovers
Ghiloth
30 motorised rolling shutters, supply to handover in 20 days
Bawal
Automatic mesh-type rolling shutters
Neemrana
Powder-coated shutters with rubber bottom seal
Bawal
Four-panel motorised sliding door
Answers for buyers and specifiers
The real questions people search on Google and ask an AI assistant, answered straight. No pricing games, no jargon.
The main types are hydraulic, mechanical (spring) and edge-of-dock levellers, matched with dock shelters and seals. We build all of these to the dock.
A dock leveller bridges a small height difference at a raised dock. A dock lift is a powered platform that raises a load through a larger height, used where there is no raised dock at all.
A dock seal uses foam pads the trailer compresses, best for consistent trailer sizes. A dock shelter uses a fabric frame that flexes to different trailer sizes. We advise which suits your mix of trucks.
For a weather-tight or refrigerated bay, yes. Leveller, shelter and seal are supplied and installed together, sized to the trailers you receive.
A pit leveller sits on, and is anchored into, the dock structure, so the pit and its edges must carry the leveller and the forklift crossing it. We check the dock construction on survey and give the pit or fixing details on the drawing before anything is ordered.
Hydraulic levellers need the oil level, hoses, cylinders and lip hinge checked, mechanical ones the springs and release. Both need the safety legs and toe guards inspected. Under an AMC we set the interval by how many trucks the bay handles.
A pit leveller needs a recess in the dock and handles a bigger height range. An edge-of-dock leveller fixes to the dock face with no pit, for smaller differences. The vehicles you receive and how the dock is built decide which.
Typically a maintenance strut to hold the platform up during service, toe guards along the sides, safety legs, and an emergency stop on hydraulic units. The schedule is listed on the drawing you approve.
It depends on how many trucks arrive in your busiest hour and how long each one stays at the dock. Share those figures and we will plan the number of bays with you rather than guess.
Yadav Entrance Automation Pvt. Ltd. manufactures dock levellers at its works at Neemrana, Rajasthan and installs them across Faridabad with its own engineers. We have been building entrance automation equipment since 2011, with 500+ installations across 50+ cities.
No. We hold no premises inside Faridabad, and we would rather say so. Faridabad is served from our Sales & Corporate Office at Sector 83, Gurugram, with manufacturing at Neemrana, Rajasthan. Survey, installation and service in Faridabad are done by the same NCR team that covers Gurugram.
All of Faridabad, including NIT Faridabad, Sectors 24, 25, 58 and 59, Ballabgarh and the Mathura Road belt. Tell us the site address with your enquiry and we will confirm the survey date before quoting rather than after.
Dispatch bays in auto-component and engineering plants across NIT Faridabad and Sectors 24, 25, 58 and 59, and warehouses towards Ballabgarh and along NH-19 that receive full trailers.
Yes. We supply genuine spares and offer Annual Maintenance Contracts for equipment we manufacture, handled by the NCR service team that covers Faridabad. On high-cycle openings the service interval should follow the cycle count, not the calendar.
Yes. The works are at Neemrana on the Delhi-Jaipur NH-48 corridor. Buyers from Faridabad usually combine a plant visit with a meeting at the Gurugram office. Call +91 95492 20707 ahead so someone is free to show you the shop floor.
Yes. We are GST registered and manufacture under Make in India, and we supply end users, main contractors, PMCs and consultants. Tell us what your purchase or tender process needs and we will provide the documentation with the quotation.
Yadav Entrance Automation is a dock leveller manufacturer for Faridabad, building hydraulic and mechanical dock levellers (dock levelers), edge-of-dock units, dock shelters and dock seals for factories and warehouses. Built at Neemrana and installed across NIT Faridabad, Ballabgarh and NH-19 by our NCR team from Gurugram.
Send the opening or dock size, the application and a rough timeline. Our team will review the requirements and contact you about a project-specific quote.
A dock leveller is a powered platform that bridges the gap between a dock and a vehicle bed. We manufacture dock levellers at Neemrana on the Delhi-Jaipur NH-48 corridor and install them across Faridabad with our own engineers — the same team that surveys the opening also commissions the equipment.
For a side-by-side comparison before you enquire, read our buyer's guide: How to choose a dock leveller: hydraulic vs mechanical vs edge-of-dock.
Reference: applicable products are CE marked (European Commission); Indian Standards are published by the Bureau of Indian Standards.
Yadav Entrance Automation Pvt. Ltd. manufactures dock levellers at our plant at Neemrana, Rajasthan on the Delhi-Jaipur NH-48 corridor, within easy reach of Gurugram (Gurgaon), and installs across Delhi NCR with our own engineers. We have been building entrance automation equipment since 2011.
Yes. Our NCR and Haryana coverage includes Gurugram (Gurgaon), Manesar, Bhiwadi, Neemrana, Bawal, Faridabad, Noida, Jhajjar, Bahadurgarh and Delhi. A sales and service team is based in Delhi NCR, and the plant sits on the corridor, so survey and installation scheduling is quicker here than for most of our coverage area.
Sites in Gurugram, Manesar, Bhiwadi, Bawal and along the Delhi-Jaipur corridor are quickest, because both the plant and a service team are close. Ask when you enquire and we will give you an actual date rather than a general lead time.
Yes. We supply genuine spares and offer Annual Maintenance Contracts for equipment we manufacture, with a service team covering the NCR and Haryana corridor. On high-cycle equipment, maintenance should follow the cycle count rather than the calendar.
Yes. The plant is at Neemrana on the Delhi-Jaipur NH-48 corridor, a straightforward drive from Gurugram. Call +91 95492 20707 ahead so a visit can be scheduled and someone is free to show you the shop floor.