Automotive
Paint booths and press shops across the Manesar and Bawal auto belt.

Delhi · served from Gurugram & Neemrana
PVC, self-repairing, cold-storage and clean-room high-speed doors for Delhi's warehouses, cold stores and plants. Built at our Neemrana works and installed by our NCR team from the Gurugram office.
A high-speed door opens and closes in seconds, so a forklift does not wait and a cold store does not lose its temperature to a Delhi summer. Buyers in Okhla, Narela and Bawana use them on dispatch bays, cold rooms and dust-sensitive production areas. We have no premises in Delhi: doors are built at Neemrana and installed and serviced by the NCR team at our Gurugram office.
The range, numbered

Flexible PVC curtain on a spiral or belt drive for internal openings and washdown areas.
View pvc high-speed door
Zipper-edge curtain that re-seats itself after a forklift knock, so a strike does not stop the line.
View self-repairing door
Insulated fast door for chillers and dispatch docks, sealing the aisle against temperature loss.
View cold-storage door
Heated-frame door rated for sub-zero rooms, keeping the seal free of frost.
View freezer door
Smooth, wipe-down door for pharma and electronics clean rooms where pressure separation matters.
View clean-room door
Heavier curtain and wind-lock build for high-cycle bays and external openings.
View industrial / exterior doorSpecify the right one
Three closures do different jobs. Here is where each fits, so you specify the right one rather than the nearest one.
| High-speed door | Rolling shutter | Sectional door | |
|---|---|---|---|
| Opens in | Seconds | Slower, geared | Moderate |
| Built for | Speed and sealing on a busy opening | A secure closure | An insulated overhead closure |
| Cycle rate | Very high, many times a shift | Low to moderate | Moderate |
| Seal & temperature | Tight, fast reseal | Basic | Insulated panel |
| Best placed | Internal traffic, cold and clean rooms | Shopfronts, secure bays | Loading bays, external walls |
Why the shortlist ends here
A plant purchase manager checks four things: do they supply plants like mine, are they close enough to service me, can they build what I need, and will someone answer the phone. Here is how Yadav answers all four.
Get a quoteDoors are built at our Neemrana works. You deal with the manufacturer, not a reseller.
No Delhi office. The NCR team at Sector 83, Gurugram surveys, installs and services Delhi sites.
Each door is sized to the surveyed opening, traffic and temperature, not one stock size.
Manufactured under an ISO 9001 quality system with CE-marked product.
Since 2011, 500+ installations across 50+ cities, with spares and service from our own team.
Where these go to work
Paint booths and press shops across the Manesar and Bawal auto belt.
Clean-room and corridor separation with wipe-down curtains.
Chillers, freezers and dispatch docks that must hold temperature.
Hygienic, washdown-friendly doors between wet and dry zones.
High-cycle internal openings on fast-moving fulfilment floors.
Peer proof, not promises
Japanese and European plants audit a supplier before they place an order. These are plants in your corridor that cleared us and buy their entrance automation from Neemrana.
Recent handovers
Ghiloth
30 motorised rolling shutters, supply to handover in 20 days
Bawal
Automatic mesh-type rolling shutters
Neemrana
Powder-coated shutters with rubber bottom seal
Bawal
Four-panel motorised sliding door
Answers for buyers and specifiers
The real questions people search on Google and ask an AI assistant, answered straight. No pricing games, no jargon.
The common types are PVC roll-up, self-repairing (zipper), cold-storage and freezer insulated doors, clean-room doors, and heavier industrial or exterior doors. We build all six to the opening.
Yes. Because the door is open for only a few seconds per pass, less conditioned or refrigerated air escapes to the aisle. On cold rooms and air-conditioned halls that is a real reduction in load.
An insulated cold-storage door for chillers, and a heated-frame freezer door for sub-zero rooms so the seal stays free of frost. Both keep the aisle sealed against temperature loss.
Where an opening is used many times an hour, yes. Each pass leaves the door open for seconds rather than minutes, so less cooled air escapes and dust stays out, which matters in Delhi summers and on dusty industrial roads. On a low-use opening a rolling shutter is the better buy, and we will say so.
The curtain material, side guides and seals are chosen against the site. On dusty openings, brush or rubber seals and a tighter curtain fit keep dust out. Tell us what the opening faces and the specification is written to it.
By a motion or radar sensor, an induction loop in the floor for forklifts, a pull cord, push button or remote. The choice follows who uses the opening: forklift traffic suits a loop or radar, pedestrian doors a push button.
Yes. Clear PVC vision strips can be built into the curtain so drivers and staff see what is on the other side before the door opens. Their position is set on the drawing.
The door can be opened by hand using the manual opening method fitted to that model, and a UPS can be specified where the opening must keep cycling. The arrangement is listed on the drawing.
Yadav Entrance Automation Pvt. Ltd. manufactures high-speed doors at its works at Neemrana, Rajasthan and installs them across Delhi with its own engineers. We have been building entrance automation equipment since 2011, with 500+ installations across 50+ cities.
No. We hold no premises inside Delhi, and we would rather say so. Delhi is served from our Sales & Corporate Office at Sector 83, Gurugram, with manufacturing at Neemrana, Rajasthan. Survey, installation and service in Delhi are done by the same NCR team that covers Gurugram.
All of Delhi, including Okhla, Naraina, Mayapuri, Wazirpur, Narela, Bawana, Mundka and Patparganj. Tell us the site address with your enquiry and we will confirm the survey date before quoting rather than after.
Cold stores and dispatch bays in Narela, Bawana and Mundka, food and pharma production areas in Okhla and Naraina, and any internal opening where forklifts pass many times an hour and dust or temperature must stay out.
We do not publish a standard figure because it depends on the current survey schedule. Ask when you enquire and you get an actual date, in writing.
Yes. We supply genuine spares and offer Annual Maintenance Contracts for equipment we manufacture, handled by the NCR service team that covers Delhi. On high-cycle openings the service interval should follow the cycle count, not the calendar.
Yes. The works are at Neemrana on the Delhi-Jaipur NH-48 corridor. Buyers from Delhi usually combine a plant visit with a meeting at the Gurugram office. Call +91 95492 20707 ahead so someone is free to show you the shop floor.
Yadav Entrance Automation is a high speed door manufacturer serving Delhi, building PVC, self-repairing (zipper), cold-storage, freezer and clean-room high-speed doors, also called rapid doors. Built at Neemrana and installed across Delhi, Okhla, Narela, Bawana and Naraina by our NCR team from Gurugram. Send your opening size for a quote.
Send the opening or dock size, the application and a rough timeline. Our team will review the requirements and contact you about a project-specific quote.
A high-speed door is a fabric or PVC door that opens and closes in seconds. We manufacture high-speed doors at Neemrana on the Delhi-Jaipur NH-48 corridor and install them across Delhi with our own engineers — the same team that surveys the opening also commissions the equipment.
For a side-by-side comparison before you enquire, read our buyer's guide: High-speed door or rolling shutter? How to choose for your opening.
Reference: applicable products are CE marked (European Commission); Indian Standards are published by the Bureau of Indian Standards.
Yadav Entrance Automation Pvt. Ltd. manufactures high-speed doors at our plant at Neemrana, Rajasthan on the Delhi-Jaipur NH-48 corridor, within easy reach of Gurugram (Gurgaon), and installs across Delhi NCR with our own engineers. We have been building entrance automation equipment since 2011.
Yes. Our NCR and Haryana coverage includes Gurugram (Gurgaon), Manesar, Bhiwadi, Neemrana, Bawal, Faridabad, Noida, Jhajjar, Bahadurgarh and Delhi. A sales and service team is based in Delhi NCR, and the plant sits on the corridor, so survey and installation scheduling is quicker here than for most of our coverage area.
Sites in Gurugram, Manesar, Bhiwadi, Bawal and along the Delhi-Jaipur corridor are quickest, because both the plant and a service team are close. Ask when you enquire and we will give you an actual date rather than a general lead time.
Yes. We supply genuine spares and offer Annual Maintenance Contracts for equipment we manufacture, with a service team covering the NCR and Haryana corridor. On high-cycle equipment, maintenance should follow the cycle count rather than the calendar.
Yes. The plant is at Neemrana on the Delhi-Jaipur NH-48 corridor, a straightforward drive from Gurugram. Call +91 95492 20707 ahead so a visit can be scheduled and someone is free to show you the shop floor.