Automotive
Paint booths and press shops across the Manesar and Bawal auto belt.
Gurugram · NCR industrial corridor
High Speed Door Manufacturer in Gurugram
Fast-cycling PVC roll-up and self-repairing doors for Gurugram's automotive, pharma and cold-chain plants. Made in-house since 2011, installed and serviced across the NCR belt.
- Since 2011
- ISO 9001
- CE marked
- 500+ installations
Rapid doors that cut forklift wait time and hold temperature
A high-speed door opens and closes in seconds, so a forklift never queues and a cold room never bleeds temperature to the aisle. On a busy Gurugram line that is fewer stalled trips per shift, less conditioned air lost, and a cleaner separation between a paint booth, a clean room and the plant floor. We design, build and commission each door to the opening, then service it locally.
The range, numbered
Six high-speed doors we manufacture
01
02
03
04
05
06
PVC high-speed door
Flexible PVC curtain on a spiral or belt drive for internal openings and washdown areas.
View pvc high-speed doorSelf-repairing door
Zipper-edge curtain that re-seats itself after a forklift knock, so a strike does not stop the line.
View self-repairing doorCold-storage door
Insulated fast door for chillers and dispatch docks, sealing the aisle against temperature loss.
View cold-storage doorFreezer door
Heated-frame door rated for sub-zero rooms, keeping the seal free of frost.
View freezer doorClean-room door
Smooth, wipe-down door for pharma and electronics clean rooms where pressure separation matters.
View clean-room doorIndustrial / exterior door
Heavier curtain and wind-lock build for high-cycle bays and external openings.
View industrial / exterior doorSpecify the right one
High-speed door vs rolling shutter vs sectional door
Three closures do different jobs. Here is where each fits, so you specify the right one rather than the nearest one.
| High-speed door | Rolling shutter | Sectional door | |
|---|---|---|---|
| Opens in | Seconds | Slower, geared | Moderate |
| Built for | Speed and sealing on a busy opening | A secure closure | An insulated overhead closure |
| Cycle rate | Very high, many times a shift | Low to moderate | Moderate |
| Seal & temperature | Tight, fast reseal | Basic | Insulated panel |
| Best placed | Internal traffic, cold and clean rooms | Shopfronts, secure bays | Loading bays, external walls |
Why the shortlist ends here
Five reasons plants around Gurugram choose Yadav
A plant purchase manager checks four things: do they supply plants like mine, are they close enough to service me, can they build what I need, and will someone answer the phone. Here is how Yadav answers all four.
Get a quote1
Made in-house
Design, fabrication and installation under one roof at Neemrana. One team is accountable, with no finger-pointing when a door needs a tweak.
2
Local to your plant
Sales office in Gurugram, works at Neemrana. A surveyor reaches your dock in a short drive, not a week.
3
Built for the opening
Every door is sized to the surveyed opening and duty, not pulled off a shelf in one stock size.
4
ISO 9001 and CE
Manufactured under an ISO 9001 quality system with CE-marked product, built to pass a Japanese or European supplier audit.
5
Here for the AMC
Since 2011, 500+ installations across 50+ cities. A vendor that will still be on your belt when the door needs service.
Where these go to work
Plants we build for around Gurugram
Pharma & healthcare
Clean-room and corridor separation with wipe-down curtains.
Cold chain
Chillers, freezers and dispatch docks that must hold temperature.
Food & beverage
Hygienic, washdown-friendly doors between wet and dry zones.
Warehousing & logistics
High-cycle internal openings on fast-moving fulfilment floors.
Peer proof, not promises
The plants that already buy from Yadav
Japanese and European plants audit a supplier before they place an order. These are plants in your corridor that cleared us and buy their entrance automation from Neemrana.
DaikinNeemrana
Nippon SteelNeemrana
Saint-GobainBhiwadi
AGC (Asahi Glass)Bawal
AhrestyBawal
TG MindaNeemrana
MusashiBawal
SMCC ConstructionNCR
Recent handovers
Svarn Infratel
Ghiloth
30 motorised rolling shutters, supply to handover in 20 days
Ahresty India
Bawal
Automatic mesh-type rolling shutters
TG Minda
Neemrana
Powder-coated shutters with rubber bottom seal
Victura Technologies
Bawal
Four-panel motorised sliding door
Answers for buyers and specifiers
22 questions plants ask about high-speed doors
The real questions people search on Google and ask an AI assistant, answered straight. No pricing games, no jargon.
What is a high-speed door?
A high-speed door is an industrial door built to open and close in seconds on an opening used many times a shift. The fast cycle cuts forklift wait time and limits the air, dust and temperature that pass between two areas.
How does a high-speed door work?
A motor drives a flexible curtain up and down along side guides, controlled by a sensor, push button, remote or loop. It opens on approach and closes behind, so the opening is only exposed for the few seconds a vehicle takes to pass.
What is a rapid door?
Rapid door, fast-action door and high-speed door are the same product: a quick-cycling industrial door. The name changes by region and supplier; the job is the same, speed and sealing on a busy opening.
What is a zipper door or self-repairing door?
A self-repairing door has a zipper-style edge that re-seats itself in the guides after a forklift knock. A minor strike does not tear the curtain or stop the line, which suits high-traffic bays.
What are the main types of high-speed doors?
The common types are PVC roll-up, self-repairing (zipper), cold-storage and freezer insulated doors, clean-room doors, and heavier industrial or exterior doors. We build all six to the opening.
What is the difference between a high-speed door and a rolling shutter?
A rolling shutter is a security closure built to seal an opening securely. A high-speed door is built for speed and sealing on an opening used many times a shift. Many plants use both, in different places.
How fast does a high-speed door open?
Opening speed is set to the opening and duty and confirmed on the quote, not quoted as a single headline figure. Faster cycles are available for high-traffic bays; the drive and motor are sized to the door.
Do high-speed doors save energy and hold temperature?
Yes. Because the door is open for only a few seconds per pass, less conditioned or refrigerated air escapes to the aisle. On cold rooms and air-conditioned halls that is a real reduction in load.
Which high-speed door is best for cold storage or a freezer?
An insulated cold-storage door for chillers, and a heated-frame freezer door for sub-zero rooms so the seal stays free of frost. Both keep the aisle sealed against temperature loss.
Which high-speed door suits a clean room or pharma plant?
A smooth, wipe-down clean-room door that supports pressure separation between graded areas. It cleans easily and cycles fast enough to keep the differential.
Can a high-speed door handle an exterior or windy opening?
Yes, with a heavier curtain and a wind-lock build. External and high-cycle bays use a reinforced door rather than a light internal curtain.
What happens if a forklift hits the door?
On a self-repairing door the curtain pops out of the guides and re-seats on the next cycle, so a knock does not stop the line. On other types we hold spares locally for a quick repair.
What sizes and opening widths can you make?
Every door is made to the surveyed opening. Non-standard widths, heights and headroom are handled to order; send the opening size and application with your enquiry.
How long does installation take?
Most single openings are installed in a day once the door is built and the site is ready. Larger or multi-door orders are scheduled after the survey.
Do you manufacture high-speed doors in-house?
Yes. Design, fabrication and installation are handled in-house at Neemrana, so one team is accountable and lead times are not at the mercy of a trader.
Are your high-speed doors ISO 9001 and CE certified?
Yadav manufactures under an ISO 9001 quality system and offers CE-marked product. Specific test certificates for a given build are provided on request.
Do you install and service high-speed doors in Gurugram?
Yes. Our sales office is in Gurugram (Sector 83) and the manufacturing unit is at Neemrana, so a survey is a short drive and a service team is on the same belt for the life of the door.
Which areas around Gurugram do you cover?
Gurugram and the wider NCR belt: IMT Manesar, Udyog Vihar, Sohna Road, Bawal, Bhiwadi, Dharuhera, Faridabad, Kundli, Rewari and beyond.
Do you offer an AMC and spares after installation?
Yes. Annual maintenance contracts and spares are available across the NCR belt, handled by a local team rather than a call centre.
How much maintenance does a high-speed door need?
A high-speed door needs periodic checks of the curtain, guides, drive and safety sensors. An AMC schedules these so a high-cycle door keeps its speed and seal.
How do I get a price or quote for a high-speed door?
Send the opening size, the application and a rough timeline and a Gurugram engineer replies within one business day with a quote and a free site survey. We do not publish list prices because every door is made to the opening.
Why choose a Gurugram-based high-speed door manufacturer?
A local manufacturer surveys faster, installs faster and services on the same belt. With in-house build you deal with the maker, not a middleman, and the same team is there for the AMC.
Question not here?
Ask an engineer on WhatsApp
Yadav Entrance Automation is a high speed door manufacturer and supplier in Gurugram (Gurgaon), building PVC, self-repairing (zipper), industrial, clean-room, cold-storage and freezer high-speed doors, also called rapid doors. We install and service across Gurugram, Manesar, Faridabad and Delhi NCR, with AMC and spares held locally. Searching for a high speed door company, or a high speed door near you in Gurugram? Send your opening size for a quote.
Get a quote for your high-speed door
Send the opening or dock size, the application and a rough timeline. A Gurugram engineer replies within one business day with a free site survey booked in.
- Free site survey across Gurugram & NCR
- In-house manufacturing, no middleman
- Local AMC and spares after handover
High-Speed Door Manufacturer in Gurugram
A high-speed door is a fabric or PVC door that opens and closes in seconds. We manufacture high-speed doors at Neemrana on the Delhi-Jaipur NH-48 corridor and install them across Gurugram (Gurgaon) with our own engineers — the same team that surveys the opening also commissions the equipment.
Where we cover around Gurugram (Gurgaon)
- Gurugram (Gurgaon) — Sales & Corporate Office at Sector 83.
- Manesar and Bawal — on the corridor; a branch office is at Bawal.
- Bhiwadi and Neemrana — the works themselves are at Neemrana.
- Faridabad, Noida, Jhajjar, Bahadurgarh and Delhi — covered by the NCR team.
- Plant visits — a straightforward drive from Gurugram; call ahead.
- See all areas we serve or our offices.
Why buyers choose us for high-speed doors around Gurugram (Gurgaon)
- Manufacturing since 2011, with 500+ installations across 50+ cities.
- ISO 9001 certified quality management system.
- CE marking on applicable products.
- Make in India — built at our own plant, not imported and rebadged.
- GST registered, with documentation suited to enterprise and PSU procurement.
- Own installation teams — we do not sub-contract fitting of our own equipment.
What to send us for an accurate quote
- Clear opening width and height — the daylight opening, not the wall opening.
- Headroom above the opening and free side-room each side.
- Power available at the position — 230V single-phase or 415V three-phase, 50 Hz.
- How many openings, and roughly how often each is used in a shift.
- Any temperature, fire-rating or hygiene requirement.
- Site location, so we can confirm coverage and schedule a survey.
Reference: applicable products are CE marked (European Commission); Indian Standards are published by the Bureau of Indian Standards.
Buying high-speed doors in Gurugram (Gurgaon) — questions we are asked
Who manufactures high-speed doors in Gurugram (Gurgaon)?
Yadav Entrance Automation Pvt. Ltd. manufactures high-speed doors at our plant at Neemrana, Rajasthan on the Delhi-Jaipur NH-48 corridor, within easy reach of Gurugram (Gurgaon), and installs across Delhi NCR with our own engineers. We have been building entrance automation equipment since 2011.
Do you install high-speed doors across Delhi NCR?
Yes. Our NCR and Haryana coverage includes Gurugram (Gurgaon), Manesar, Bhiwadi, Neemrana, Bawal, Faridabad, Noida, Jhajjar, Bahadurgarh and Delhi. A sales and service team is based in Delhi NCR, and the plant sits on the corridor, so survey and installation scheduling is quicker here than for most of our coverage area.
How quickly can someone survey my site?
Sites in Gurugram, Manesar, Bhiwadi, Bawal and along the Delhi-Jaipur corridor are quickest, because both the plant and a service team are close. Ask when you enquire and we will give you an actual date rather than a general lead time.
Do you provide service and AMC in the NCR corridor?
Yes. We supply genuine spares and offer Annual Maintenance Contracts for equipment we manufacture, with a service team covering the NCR and Haryana corridor. On high-cycle equipment, maintenance should follow the cycle count rather than the calendar.
Can I visit the factory from Gurugram?
Yes. The plant is at Neemrana on the Delhi-Jaipur NH-48 corridor, a straightforward drive from Gurugram. Call +91 95492 20707 ahead so a visit can be scheduled and someone is free to show you the shop floor.